Conformation Analysis of GalNAc‐Appended Sugar Amino Acid Foldamers as Glycopeptide Mimics

Sugar amino acid (SAA)‐based foldamers with well‐defined secondary structures were appended with N‐acetylgalactosamine (GalNAc) sugars to access sequence‐defined, multidentate glycoconjugates with full control over number, spacing and position. Conformation analysis of these glycopeptides by extensive NMR spectroscopic studies revealed that the appended GalNAc units had a profound influence on the native conformational behaviour of the SAA foldamers. Whereas the 2,5‐cis glycoconjugate showed a helical structure in water, comprising of two consecutive 16‐membered hydrogen bonds, its 2,5‐trans congener displayed an unprecedented 16/10‐mixed turn structure not seen before in any glycopeptide foldamer.     

Insights into Protein Stability in Cell Lysate by 19F NMR Spectroscopy

In living organisms, protein folding and function take place in an inhomogeneous, highly crowded environment possessing a concentration of diverse macromolecules of up to 400 g/L. It has been shown that the intracellular environment has a pronounced effect on the stability, dynamics and function of the protein under study, and has for this reason to be considered. However, most protein studies neglect the presence of these macromolecules. Consequently, we probe here the overall thermodynamic stability of cold shock protein B from Bacillus subtilis (BsCspB) in cell lysate. We found that an increase in cell lysate concentration causes a monotonic increase in the thermodynamic stability of BsCspB. This result strongly underlines the importance of considering the biological environment when inherent protein parameters are quantitatively determined. Moreover, we demonstrate that targeted application of ¹⁹F NMR spectroscopy operates as an ideal tool for protein studies performed in complex cellular surroundings.     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

透明红外硫系薄膜非均匀性检测及影响因素

薄膜非均匀性的无损检测对于制备大面积高质量的红外透明薄膜尤为重要。针对红外薄膜光学均匀性难以获取的困难,提出了一种同时获得单层透明红外薄膜厚度和折射率均匀性的无损检测方法。实验上,通过磁控溅射法在二氧化硅衬底上制备了厚度约1.4μm红外透明Ge-Sb-Se硫系薄膜,然后在该薄膜上标定出36个80μm×80μm区域,利用显微傅里叶红外光谱仪测得该36个区域的透射谱,通过分段滤波的方法滤除背景噪声,运用改进的Swanepoel方法计算得到了薄膜每一个区域的厚度和折射率,进而精确获得该薄膜的厚度和折射率均匀性,结果表明精度优于0.5%。     

La2O3对SiO2-CaO-Al2O3-MgO熔体黏度和结构的影响

使用分析纯物质模拟微晶玻璃熔体，分别采用柱体旋转法和拉曼光谱技术研究了La2O3含量对SiO2-CaO-Al2O3-MgO熔体黏度和结构的影响规律。结果表明：熔体黏度和黏流活化能随着La2O3含量的增加而降低；拉曼光谱表明La2O3能破坏硅酸盐结构（Qn），随着La2O3含量的增加，Q1、Q2的百分含量增加，Q3的百分含量减小，Q0的百分含量基本不变，表明熔体中非桥氧数量增加，熔体聚合度降低。La2O3在熔体中起网络修饰体的作用。     

Online monitoring of the curing of adhesives with a miniaturised interdigital sensor using impedance spectroscopy

Monitoring adhesives during manufacturing and their lifetime has become increasingly important due to the variety of materials and applications. Impedance spectroscopy is a suitable method for online monitoring of the curing process. We present a miniaturised interdigital structure to monitor the curing process of the adhesives using impedance spectroscopy. Compared to other sensors, our sensor is ultrathin, so that it disappears in the adhesive joint. Therefore, it can remain in the joint and be used for lifetime monitoring. In addition it is suitable for thin adhesive layers due to its fine grid. We demonstrate that the impedance of the sensor embedded in the adhesive gives insight into the curing mechanisms. Therefore monitoring of a dispersion and an epoxy is shown. In addition, the curing cycles can be reliably controlled using this monitoring method. The permittivity of the adhesives is extracted from the impedance measurements, applying analytical models of the electrical field of the interdigital structure.     

红外热成像在乳腺疾病检测的应用研究

乳腺疾病已严重危害女性身心健康,其中乳腺癌更位居全球范围内女性癌症发病率和死亡率首位,因此乳腺癌的早期发现意义重大。传统结构影像学早期检测疾病具有一定局限性,而红外热成像作为功能成像技术可为乳腺癌的早期筛查提供有效线索。因此本文主要就红外热成像在乳腺疾病的早期检测及预后评估的应用价值进行综述。     

The influence of light on the chroma of aviation kerosene

Influence of light on the chroma of low pressure hydrogenation aviation kerosene was studied using different lights (ultraviolet light, infrared light, sunlight and no light) in the same environment full of oxygen. UV light with short wavelength has the largest influence. Coloring substances were isolated by adsorption on neutral alumina followed by ether extraction and identified by using infrared spectrum, elemental analysis and two-dimensional GC-MS. Oxygen-containing compounds are main coloring substances. Light can provide the required energy to convert unsaturated hydrocarbons and heteroatom compounds to phenols, quinones and ketones.     

Influence of the chemical structure of additives poly(ethylene-co-vinyl acetate)-based on the pour point of crude oils

One of the methods to prevent wax precipitation, during petroleum production, transport, and refining, is the use of polymer additives that can reduce the oil pour point. However, no single additive work for all types of crude oil and this relation is not yet well known. In this study, a family of polymers based on poly(ethylene-co-vinyl acetate), containing hydroxyl groups and long pendant hydrocarbon chains (from C6 to C18), were synthesized and characterized by H¹ nuclear magnetic resonance and solubility test. Four crude oil samples containing different amounts and size distribution of the wax were used. The additive's action is favored by higher contents of iso + cycloalkanes and lower contents of n-paraffins with larger chain sizes. The presence of the CH₃COO group in the copolymers promoted the lowering of the pour point, supported by a low OH concentration and the presence of a long pendant hydrocarbon chain: the best results were obtained with C10 and C12 chain lengths. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48969.     

Influence of the synthesis conditions on the microstructural,compositional and morphological properties of graphene oxide sheets

In this paper we report about the synthesis and characterization of graphene oxide (GO). We monitor the effects of the different synthetic processes on the morphological and structural properties of the materials. A modified Hummers' method is adopted to obtain GO powder; H₂SO₄ is employed as intercalating agent, to increase the distance between graphitic layers, while KMnO₄ is used as oxidizing reagent for introducing the oxygen functionalities in the graphitic structure. The oxidized graphite powder is treated in acid solution; different washing cycles are applied. The recovered powders are dispersed in aqueous solution and sonicated for 30 min or 60 min, respectively. Subsequently, these solutions are deposited on Si and SiO₂(317 nm)/Si substrates by means of dip coating. GO powders, GO solutions and GO on substrate are characterized through several analytical and spectroscopic techniques. These analyses reveal that the sonication time and the washing procedure of the samples can influence the structure and the morphology of the graphene oxide flakes. Moreover, when KOH is employed as alkaline agent in a chemical reducing treatment of the GO powder before sonication, a considerable alteration of the native structure of graphene oxide is observed. The detailed characterization indicates that the properties of the GO samples are strongly influenced by the chemical and physical treatments to which it is subjected.